This chair is part of the Shiro Bi range, which means Birch in Japanese, the wood used for all the pieces in this range. The chair highlights the edges of the birch plywood and can be knocked down easily, saving space when not in use.
Product Detail
- Birch plywood
- Some assembly required
The product comes with a 6 month warranty against any manufacturing defects in the materials that have been used. During this period, Mohh will in its sole discretion, repair or replace the defective component, or replace the entire product if found defective in material or workmanship.
Prolonged exposure to sunlight should be avoided as colour/polish may fade. Care should be taken to protect the products from water as it can cause damage. Avoid using abrasive materials like scrub pads as they may scratch the surface. Clean with a slightly damp, soft micro fibre cloth in the directions of the wood grains.
- No cleaning agent or chemical to be used.
- In case of a spill on the product, blot the spill and never try to wipe it as that will spoil the surface.
- Do not keep warm or cold items directly on the product surface, always use coasters or mats.
- Avoid sliding or passing items placed over the product, to prevent scratches and damage to the finish.
Specifications
Product dimensions (cm) | 48.3 X 46 X 98.3 |
Product weight (per piece) | 18.5 KG |
Installation type | Free standing |
Primary material | Birch plywood |
No. of parts | 8 |
Assembly type | DIY |
Assembly Details
If ordered knocked-down, some assembly is required required. The wooden legs have to be joined together with the wooden connectors, the seat and back rest must be attached using simple screws once the leg structure is ready.
It can be easily assembled using allen key and screws provided with the product. Step-by-step instructions, with graphic details, shall be provided in the packaged box.